Chevrolet Silverado MY16–19 Caravan & Towing Camera Integration
See behind your caravan through your Silverado’s original compatible MyLink screen.
NAVIPLUS Melbourne offers towing-camera integration for compatible Chevrolet Silverado MY16–19 vehicles. Connect a suitable caravan, trailer or horse float camera while retaining the factory dashboard display.
The compatible installation provides an external camera view without requiring a separate dashboard monitor. Camera compatibility, trailer connections and viewing requirements are assessed before the interface is selected.
Towing-Camera View Through Your Factory Screen
The selected interface connects a compatible external camera to your Silverado’s matching MyLink display.
Your installation is configured around the actual factory equipment, existing rear camera and trailer-camera arrangement. Send details of your current setup so NAVIPLUS can identify suitable equipment and any additional cables or accessories required.
Choose Your Reversing View
On a matching supported configuration, you can select between the factory rear camera and external towing camera while in Reverse.
Activation and switching are confirmed for your installation. The exact controls and operation depend on the selected interface and fitted equipment.
If you need camera viewing outside Reverse, discuss this before ordering. Continuous viewing and horse float monitoring require confirmation for the proposed configuration.
Already Have a Caravan or Trailer Camera?
An existing camera requires a compatibility assessment before connection.
Send NAVIPLUS:
The camera brand and model.
Its video format.
Clear photos of the camera connectors.
Details of existing trailer plugs and camera connections.
Information about current cables and any additional cabling required.
The camera format must match the selected interface. Matching connectors alone do not establish compatibility.
Include details of previous camera or infotainment modifications so these can be considered when planning the installation.
Optional Camera and WOZA Trailer Cable Pack
If you need a camera and cable arrangement, ask about the optional heavy-duty NTSC camera and WOZA trailer cable pack.
NAVIPLUS confirms the camera format against the interface selected for your Silverado. Your quotation identifies the camera equipment, cables and accessories supplied.
Camera equipment, cables and installation are included only when quoted.
Trailer Plugs, Cable Length and Mounting
Confirm your trailer plugs, required cable length and camera mounting requirements before ordering.
Photos of the vehicle and trailer connections help NAVIPLUS assess the proposed arrangement. Include details of existing cable runs and where you want the camera mounted.
Your quotation confirms the interface, accessories and installation scope for the agreed setup.
Confirm Your Silverado’s MyLink System
The listed application covers Chevrolet Silverado MY16–19 with matching factory MyLink equipment.
Model year alone does not confirm compatibility. The actual screen, existing camera and previous modifications require assessment.
For a compatibility check and quotation, send:
Your vehicle’s build details and variant.
A clear photo of the complete dashboard audio panel.
A photo of the powered-on MyLink display.
Details of the existing vehicle rear camera.
Your trailer-camera model and video format.
Photos of camera connectors and trailer plugs.
Your cable length and mounting requirements.
Whether you need reversing-only operation or viewing outside Reverse.
Key Features of the Compatible Package
External caravan, trailer or horse float camera integration.
Factory rear-camera / towing-camera selection in Reverse, where supported.
Original compatible MyLink screen retained.
No separate dashboard monitor required.
Camera compatibility and trailer connections assessed before interface selection.
Optional heavy-duty NTSC camera and WOZA trailer cable pack.
Activation and switching confirmed for your installation.
A 12-month product warranty, subject to terms.
Installation to Suit Your Setup
The installation is configured around your Silverado’s factory equipment, selected interface and confirmed towing-camera arrangement.
The agreed activation, camera selection and viewing modes are confirmed for your supplied setup. Any requirement for viewing outside Reverse should be discussed before ordering.
Your quotation identifies the interface, camera equipment where selected, cables, accessories and installation work included.
Camera views assist visibility. Always check your surroundings and mirrors when manoeuvring.
Frequently Asked Questions
Will my original MyLink screen be replaced?
No. The compatible installation uses your original factory MyLink display.
Can I select between the factory rear camera and towing camera?
Yes, on a matching supported configuration while in Reverse. Activation and switching are confirmed for your installation.
Can I use my existing caravan camera?
It requires assessment. Send the camera model, video format and connector photos so NAVIPLUS can check suitability for the selected interface.
Does every installation require an NTSC camera?
The camera format must match the selected interface. NAVIPLUS confirms the required format for your package. The optional heavy-duty camera pack uses an NTSC camera.
Are the camera and WOZA cables included?
They are optional and included only when specified in your quotation.
Can I view the camera outside Reverse?
This requires confirmation before ordering. Supported viewing modes depend on the selected interface and installation configuration.
Can a horse float camera be connected?
A compatible horse float camera can be assessed for integration. Tell NAVIPLUS whether you need a reversing view or monitoring outside Reverse.
Does this fit every MY16–19 Silverado?
Compatibility requires matching factory MyLink equipment. The screen, existing camera and previous modifications must be checked before the package is confirmed.
Silverado Caravan Camera Integration in Melbourne
Bring a compatible towing-camera view to your Silverado’s original MyLink screen.
Contact NAVIPLUS Melbourne with your build details, dashboard photo and trailer-camera information for a compatibility check and quotation. Include your trailer plugs, cable length, mounting requirements and any need for viewing outside Reverse.
NAVIPLUS | Melbourne, Australia
Phone: 03 9546 0452
Email: sales@naviplus.com.au
Website: www.naviplus.com.au
Vehicle and camera compatibility must be confirmed before ordering. Camera format, activation, source selection and viewing modes depend on the selected interface and installed equipment. Cameras, cables, accessories and installation are included only where quoted. Product warranty terms apply.
Comments