Chevrolet Silverado 1500 / 2500 Caravan Camera Integration | MY19-on Generation
See behind your caravan through your Silverado’s original compatible factory screen.
NAVIPLUS Melbourne offers caravan and towing-camera integration for compatible Chevrolet Silverado 1500 / 2500 vehicles with the updated MY19-on factory system.
Connect a suitable caravan, trailer or horse float camera while retaining the original dashboard display, without a separate monitor.
Choose Your Reversing View
On a matching supported configuration, you can select between the factory rear camera and external towing camera while in Reverse.
Activation and switching are confirmed during installation for your selected interface and fitted equipment.
If you need camera viewing outside Reverse, discuss this before ordering. Continuous viewing and horse float monitoring require confirmation for the proposed setup.
Existing Camera Compatibility
The interface supports compatible standard CVBS NTSC / PAL camera inputs.
AHD or digital cameras require a separate compatibility check. Send the camera specifications before ordering so NAVIPLUS can assess the equipment against the proposed interface.
For an existing camera, include:
Camera brand and model.
Video format.
Clear connector photos.
Details of current trailer-camera cables.
Photos of vehicle and trailer connections.
Matching connectors alone do not establish compatibility. The camera format must match the selected interface.
Optional Camera and WOZA Trailer Cable Pack
Ask about the optional heavy-duty NTSC camera and WOZA trailer cable pack if you need camera hardware and a trailer cable arrangement.
NAVIPLUS confirms the selected camera format against the interface recommended for your Silverado.
The interface / harness package does not include a rear camera. Cameras, cables and labour are included only when specified in your quotation.
Include your required cable length, trailer connections and mounting requirements with your enquiry so the installation scope can be assessed.
Confirm the Updated MY19-on Factory System
This application is for compatible Silverado 1500 / 2500 models with the updated MY19-on factory system.
MY19 overlaps the earlier application. Screen and connector checks are essential to identify the correct interface; year alone does not confirm fitment.
Send clear photos of the powered-on factory display and surrounding dashboard controls. Further connector confirmation may be required before the package can be selected.
Include details of existing cameras, replacement equipment and previous infotainment modifications.
Key Features of the Compatible Package
External caravan, trailer or horse float camera integration.
Factory rear-camera / towing-camera selection in Reverse, where supported.
Original factory screen retained.
No separate dashboard monitor required.
Compatible standard CVBS NTSC / PAL camera input support.
Optional heavy-duty NTSC camera and WOZA trailer cable pack.
Activation and switching confirmed during installation.
A 12-month product warranty, subject to terms.
What to Send for a Compatibility Check
Contact NAVIPLUS with:
Your Silverado’s build details and variant.
Whether it is a 1500 or 2500.
A clear photo of the complete dashboard audio panel.
A photo of the powered-on factory display.
Details of the existing vehicle rear camera.
Your external camera model and video format.
Camera and trailer-connector photos.
Trailer cable requirements, including length.
Any requirement for viewing outside Reverse.
These details help confirm the appropriate interface, camera compatibility and installation arrangement.
Installation to Suit Your Towing Setup
The installation is configured around your Silverado’s factory equipment, selected interface and confirmed camera arrangement.
Activation, camera-source selection and supported viewing modes are confirmed for the supplied setup. Discuss any requirement for viewing outside Reverse before ordering.
Your quotation identifies the interface, harness, accessories and any cameras, cables or labour included.
Camera views assist visibility. Always check your surroundings and mirrors when manoeuvring.
Frequently Asked Questions
Will my original factory screen be replaced?
No. The compatible installation retains your original factory display.
Can I select between the factory camera and caravan camera?
Yes, on a matching supported configuration while in Reverse. Activation and switching are confirmed during installation.
Can I use an existing NTSC or PAL camera?
Compatible standard CVBS NTSC / PAL camera inputs are supported. Send the camera model, video format and connector photos for assessment.
Can I connect an AHD or digital camera?
These cameras require a separate compatibility check before suitability can be confirmed.
Does the interface / harness package include a rear camera?
No. A rear camera is not included in the interface / harness package. Cameras, cables and labour are included only when quoted.
Is the WOZA trailer cable pack included?
The heavy-duty NTSC camera and WOZA trailer cable pack is optional. Your quotation confirms the equipment supplied.
Can I view the camera outside Reverse?
This requires confirmation before ordering. Supported viewing modes depend on the selected interface and installed equipment.
Which package suits a MY19 Silverado?
MY19 overlaps the earlier application. The factory screen and connectors must be checked to identify the correct package.
Does this suit both Silverado 1500 and 2500 models?
Compatible 1500 / 2500 applications can be assessed. Actual factory-system and connector confirmation is required for each vehicle.
Silverado Caravan Camera Integration in Melbourne
Bring a compatible caravan or trailer-camera view to your Silverado’s original factory screen.
Contact NAVIPLUS Melbourne with your build details, dashboard photo, existing-camera information and trailer cable requirements for a compatibility check and quotation.
NAVIPLUS | Melbourne, Australia
Phone: 03 9546 0452
Email: sales@naviplus.com.au
Website: www.naviplus.com.au
Vehicle and camera compatibility must be confirmed before ordering. MY19 applications require screen and connector checks. Camera activation, source selection and viewing modes depend on the supplied configuration. The interface / harness package does not include a rear camera. Cameras, cables and labour are included only where quoted. Product warranty terms apply.
Comments