Ford Ranger SYNC 4A Front & Caravan Camera Integration | 2022+ | 12-Inch Display
A front camera can help you check obstacles near your Ranger’s bumper, while a caravan camera provides a view further behind your towing setup. Integrating these camera inputs with the factory display keeps the information accessible through the screen already in your dashboard.
NAVIPLUS Melbourne offers camera video-interface integration for compatible Ford Ranger vehicles fitted with the factory 12-inch portrait SYNC 4A display. The interface supports compatible front-view and caravan or trailer camera inputs while retaining the original display and head unit.
Front and Caravan Camera Inputs on Your Factory Screen
The interface allows compatible additional camera views to appear on your Ranger’s original SYNC 4A display.
Depending on the selected equipment and installation configuration, the setup can provide:
A front-camera view for checking the area ahead.
An external caravan or trailer camera view.
Access to the configured camera / AV mode through supported factory controls.
Optional camera display after leaving Reverse.
The supplied cameras, available views and switching functions are confirmed in your quotation.
Camera Access Using the Steering-Wheel Back Button
On supported configurations, hold the steering-wheel Back button for 3 seconds to access the configured camera / AV mode.
Camera-source selection and the method used to return to the original Ford system are confirmed during installation.
This allows camera access through a supported factory-button shortcut while retaining the original dashboard layout.
Optional Camera Display After Leaving Reverse
An optional post-reverse trigger can display the configured camera view after the vehicle leaves Reverse.
Discuss which camera you want to appear and how you intend to use it when requesting a quotation. The supported trigger behaviour and final settings are confirmed for the supplied interface during installation.
How Does the Image Fit the Portrait Screen?
The factory SYNC 4A display has a vertical layout, while the camera image appears within a landscape window.
The camera view may therefore occupy only part of the display rather than filling the entire portrait screen. Confirm the proposed image layout before ordering if screen coverage is important to your requirements.
Key Features of the Compatible Installation
Compatible front-view camera input.
Compatible caravan or trailer camera input.
Steering-wheel Back-button access on supported configurations.
Optional camera display after leaving Reverse.
Original display and head unit retained.
No separate dashboard monitor required.
No vehicle coding required for the compatible installation.
A 12-month product warranty, subject to terms.
Vehicle compatibility, camera inputs and supported controls must be confirmed for your exact setup.
Which Ford Rangers Are Compatible?
This package requires the compatible factory 12-inch vertical SYNC 4A display.
The listing’s year guide is 2022 onwards, subject to individual build and variant confirmation. Build year alone does not establish suitability.
Send NAVIPLUS your Ranger’s build date, variant and a clear photo of the powered-on factory screen. Include details of:
Factory front and rear cameras.
Parking sensors.
Factory surround-view equipment.
Existing aftermarket cameras or video interfaces.
Previous infotainment modifications.
These details help establish the appropriate interface and assess retention of existing functions.
Already Have a Caravan Camera?
Your existing camera may be suitable, but compatibility must be checked before reuse can be confirmed.
Please send:
Camera brand and model.
Video format, if known.
Camera supply voltage.
Clear photos of the camera and connectors.
Details of existing vehicle and caravan cables.
Details of any wireless transmitter, receiver or monitor.
Matching connectors alone do not confirm compatibility. Existing cables and wireless equipment also require assessment.
Optional Camera and WOZA Trailer Cable Pack
If you need new towing-camera equipment, ask about the optional heavy-duty NTSC camera and WOZA trailer cable pack.
The camera, trailer connection and vehicle-side wiring need to suit the proposed installation. Include photos of any existing sockets and cables you would like to retain.
Cameras, cables, accessories and installation are included only where specified in your quotation.
Viewing While Driving and Horse-Float Monitoring
Discuss any requirement for viewing while driving or horse-float monitoring before ordering.
Explain whether you need a view behind the caravan, inside a horse float, or another camera arrangement. Availability depends on the selected interface, camera equipment and installation configuration.
Camera-mode access and a post-reverse trigger do not, by themselves, confirm continuous viewing support.
Frequently Asked Questions
Will my original Ford display and head unit be replaced?
No. The compatible installation retains your original factory display and head unit.
Does this suit every 2022 onwards Ranger?
No. The fitted screen, build and variant must be checked. This package requires the compatible factory 12-inch portrait SYNC 4A display.
How do I access the camera mode?
On supported configurations, hold the steering-wheel Back button for 3 seconds. Final camera selection and return controls are confirmed during installation.
Will the camera image fill the whole screen?
The image appears within a landscape window and may not fill the entire portrait display.
Can a camera appear after reversing?
An optional post-reverse trigger is available for compatible configurations. The selected view and operating behaviour are confirmed during installation.
Will the factory cameras and parking functions remain available?
Retention of existing functions must be assessed for your Ranger and selected interface. Include details of factory cameras, parking sensors and surround-view equipment with your enquiry.
Can I reuse my existing caravan camera?
Possibly. Send its specifications, connector photos and cable details for compatibility assessment.
Can I use it for horse-float monitoring?
Discuss the required camera view and when you need it available before ordering. Support must be confirmed for the proposed setup.
Are cameras and installation included?
Only where specified in your quotation. Ask about available camera and cable options when requesting your package.
Ford Ranger SYNC 4A Camera Installation in Melbourne
Add compatible front or caravan camera views to your Ranger’s original 12-inch SYNC 4A display while retaining the factory dashboard appearance.
Contact NAVIPLUS Melbourne with your build date, variant, powered-on screen photo and existing camera details for a compatibility check and quotation. Tell us which views you need and whether you require post-reverse display, viewing while driving or horse-float monitoring.
NAVIPLUS | Melbourne, Australia
Phone: 03 9546 0452
Email: sales@naviplus.com.au
Website: www.naviplus.com.au
Vehicle compatibility, factory-function retention, camera views and switching controls must be confirmed before ordering. Camera images appear within a landscape window. Cameras, cables, accessories and installation are included only where specified in your quotation. Product warranty terms apply.
Comments