Ford Ranger PX2 / PX3 SYNC 3 Front Camera Integration | 2017–2020
Low kerbs, parking blocks and obstacles close to the front bumper can be difficult to judge from the driver’s seat of a Ranger. A front camera provides an additional perspective when approaching a parking space or manoeuvring in a tight garage.
NAVIPLUS Melbourne offers front-camera integration for compatible Ford Ranger PX2 / PX3 vehicles fitted with factory SYNC 3. View the area ahead through your original Ford screen while retaining the existing dashboard appearance.
Front-Camera Viewing on Your Original SYNC 3 Screen
The integration displays a compatible front-camera image on the factory SYNC 3 display, allowing you to use the screen already built into your Ranger.
Your original display stays in place, and no separate dashboard monitor is required. No vehicle coding is required for the compatible package.
The interface must suit the infotainment system actually fitted to your vehicle. Build year alone does not confirm compatibility.
Check the Area Ahead When Parking
A front camera can help you check obstacles that are difficult to see directly from the driver’s seat, including:
Low kerbs and parking blocks.
Objects close to the front bumper.
Garage obstacles and confined parking spaces.
The area ahead when positioning the vehicle.
The visible area depends on the selected camera, its mounting position and the vehicle’s bodywork. Include details of any bull bar, nudge bar or bumper modifications when requesting a quotation so camera placement can be assessed.
Optional 170° Multi-View Front Camera
Ask NAVIPLUS about the available 170° multi-view front-camera option.
This option provides a wide-angle camera solution, with supported viewing modes and camera-view selection confirmed for the supplied equipment.
The 170° multi-view camera is an option rather than an assumed inclusion in every package. Your quotation confirms the selected camera, available views, controls and accessories.
A front-camera image does not provide complete coverage around the vehicle or a stitched 360° surround view.
Manual Front-Camera Activation
Activate the front-camera view using the supported controls configured for your installation.
The supplied interface determines the activation button, camera-view selection and the method used to return to the original Ford screen. These controls are confirmed for your package and demonstrated during installation.
Discuss your preferred control arrangement when requesting a quote so the proposed setup can be checked against your requirements.
Key Features of the Compatible Package
Front-camera image on the original Ford SYNC 3 display.
Optional 170° multi-view camera.
Manual activation through supported controls.
Original dashboard appearance retained.
No separate dashboard monitor required.
No vehicle coding required for the compatible package.
A 12-month product warranty, subject to terms.
The supplied camera, supported views, switch, accessories and installation charges are confirmed in your quotation.
Which Ford Ranger Models Are Compatible?
This package is intended for supported Ford Ranger PX MKII / MKIII vehicles, commonly referred to as PX2 / PX3, fitted with compatible factory SYNC 3.
The listing’s 2017–2020 year range is a guide, subject to confirmation of the installed system. Previous screen replacements, aftermarket interfaces and camera modifications may affect the required configuration.
For a compatibility check, send NAVIPLUS:
Your Ranger model and build year.
A clear photo of the factory screen while powered on.
Details of existing front and rear cameras.
Details of aftermarket infotainment interfaces.
Photos of any front bumper or bar modifications relevant to camera placement.
Camera Selection and Installation
Choosing a suitable mounting position helps establish which area appears on screen. Explain what you want to see, particularly if your main concern is a low parking block, bumper clearance or a confined garage entrance.
If you already have a front camera, send its brand, model and specifications for assessment before assuming it can be reused.
Your quotation confirms the camera, interface, supported views, switching controls, accessories and installation charges included in the package.
Frequently Asked Questions
Will my original Ford screen be replaced?
No. This integration displays the front-camera image on your existing compatible factory SYNC 3 screen.
How do I activate the front camera?
The camera is activated manually through supported controls configured for your installation. The activation button and return-to-factory-screen operation are confirmed with the supplied interface.
Is the 170° multi-view camera included?
It is an available option. Your quotation confirms the supplied camera, supported viewing modes and any associated controls.
Does this fit every 2017–2020 Ranger?
No. The year range is a guide. Your Ranger must have compatible SYNC 3 equipment, and a powered-on factory-screen photo is required to check suitability.
Can I keep my existing reverse camera?
Retention of existing camera functions must be confirmed for your vehicle and selected interface. Include details of your current camera setup with your enquiry.
Can I reuse an existing front camera?
Compatibility requires assessment. Send the camera’s brand, model, specifications and connector photos before ordering.
Does the compatible package require coding?
No vehicle coding is required for the compatible package. The fitted infotainment system still needs to be checked for compatibility.
Is installation included?
Installation charges and package contents are confirmed in your quotation.
Ford Ranger Front Camera Installation in Melbourne
Add a useful view ahead of your Ranger while keeping its original SYNC 3 screen and dashboard layout.
Contact NAVIPLUS Melbourne with your model, build year and powered-on factory-screen photo for a compatibility check and quotation. Ask about the optional 170° multi-view camera and include details of existing cameras, aftermarket interfaces or front-bar modifications.
NAVIPLUS | Melbourne, Australia
Phone: 03 9546 0452
Email: sales@naviplus.com.au
Website: www.naviplus.com.au
Vehicle compatibility, camera views and manual controls must be confirmed before ordering. Camera coverage depends on the selected camera and mounting position. Package contents and installation charges are specified in your quotation. Product warranty terms apply.
Comments